Description
Product overview
EnOcean Wireless Water Sensor (WWS-ENO) is a battery-powered device designed for low-power, wireless water detection. It features two exposed conductive screw heads that serve as electrodes. When water completes the circuit between the two electrodes, the sensor is triggered and transmits a leak-detection signal. A leak detection cable attached to the screw heads allow the sensor to be wall-mounted while the cable is positioned along the floor-wall junction. This product is designed for use with a WES EnOcean Wireless Valve Controller (WVC) as part of a wireless leak detection system. This wireless leak detection system incorporates EnOcean technology with an EnOcean to BACnet gateway to connect WVCs, wireless sensors, smart valve controllers, and building automation protocols to provide comprehensive protection against water damage.
Key Features:
• Power supply: Two 1.5V AA alkaline batteries.
• Over-voltage protection: 6VDC (for the event that 3V lithium AA batteries are used by mistake).
• Average current drain: 9 μA at 25° C.
• Battery life: At least 7 years.
• Territory: Currently only approved for EU countries and the UK.
• Signalling method: EnOcean Radio Protocol.
• Signalling frequency: 868 MHz.
• Antenna: Internal.
• EEP: F6-05-01.
• Range: Up to 200 m in open space, range through walls is reduced.
• Operating temperature range: typically -10° C to +50° C. Indoor use only, the unit is not weatherproof.
